Aiwa XR-M35 manual Connections, Before connecting the AC cord, Connect the AC cord to an AC outlet

CONNECTIONS

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage.

3 Connect the AC cord to an AC outlet.

When the AC cord is connected for the first time, the display window demonstrates the functions of the unit. When the power

is turned on, the demonstration display is overridden by the

operation display. When the power is turned off, the

demonstration mode is restored.

IMPORTANT

●Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord in the end.

●There are no differences between the front speakers. Both speakers can be connected as L (Left) or R (Right).

1Connect the speaker cords to the main unit.

The cords with the white stripes should be connected to the

~terminals and the other cords to the O terminals.

@d

Q

To cancel the demonstration

Press the DEMO button or turn the MULTI JOG dial right or left. To activate, press the DEMO button again.

Do not short-circuit the ~ and O speaker cord leads; otherwise the sound may become inaudible or the unit may be turned off. If this happens, disconnect the AC cord from the AC outlet and re-connect the s~eaker cord correctlv.. Connect then the AC cord and turn the unit on again.

o

2 Connect the supplied antennas.

Connect the FM antenna to the FM 75 Q terminals and the

AM antenna to the AM LOOP terminals.

2 AM antenna D	FM antenna
~T

Speaker cord 3 AC cord

3 ENGLISH