Aiwa XR-M35 Al EDIT RECORDING, Press the EDIT/CHECK button once while pressing the SHIFT button

Al EDIT RECORDING

34

3

Fb

55

2

E

The Al edit function enables CD recording without worrying about tap~ length and track length, When a CD is inserted, the unit autc,matically calculates track lengths. If necessary, the order of tracks is rearranged so that no track is cut short.

(Al: Artificial Intelligence)

mm

Al edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.

Use the remote control from steps 3 to 5.

1 Insert the tape into the deck, and turn Dolby NR on or off by using the MODE button and the MULTI

JOG dial. ( see “BASIC RECORDING step 3 )

I lsert the tape with the side to be recorded on first facing out

f’om the unit.

2Press the CD button on the main unit so that “CD” is displayed, and load the disc.

}’OUcan pressthe FUNCTION button on the remote control

repeatedly to display “CD”.

3 Press the EDIT/CHECK button once while pressing the SHIFT button.

“EDIT lights up and “Al” flashes on the display.

Al

4 Press the numbered buttons to designate the

tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press the 6 and O buttons.

In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.

*The 44 and PP buttons and the MULTI JOG dial are also available to designate the tape length.

Tape length

Tape	side A	o	Remaining time
(front	side)		of side A

Number of	Selected	tracks
programmed tracks	for side	A

5 First press the @ button and then press the >

button within 2 seconds to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts, When recording on the front (side A) ends, recording on the back (side B) starts.

To stop	recording	❑
Press the	■ button, Recording and CD play stop simultaneously.

To clear the edit program

Press the 9 button twice so that “EDIT” disappears on the display,

To check the order of the programmed track numbers Before recording, press the EDIT/CHECK button while pressing the SHIFT button to select side A or B, and press the ➤P button repeatedly.

Program number

Track number	Programmed
	track numbers

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than the specified recording time printed on “thelabel. This unit can program tracks to use the extra time.

●Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

●The Al edit function cannot be used with discs containing 31 tracks or more.

ENGLISH 14