Aiwa XR-M35 Setting The Sleep Timer, Connecting Optional Equipment, Video/Aux Jacks & Md Jacks

SETTING THE SLEEP TIMER

1

12

The unit can be turned off automatically at a specified time.

Use the remote control.

7 Press the SLEEP button while pressing the SHIFT button.

2 Within 4 seconds, press the - or - button to specify the time until the power is turned off.

Each time the button is pressed, the time changes between 5 and 240 minutes in 5-minute steps.

Specified time

To check the time remaining until the power is turned off

Press the SLEEP button once while pressing the SHIFT button. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press the SLEEP button twice while pressing the SHIFT button so that “SLEEP on the display disappears. (The “SLEEP oFF” indication appears.)

CONNECTING OPTIONAL

EQUIPMENT

MD

VI DEO/AUX

LINE OUT

SUPER WOOFER

Refer to the operating instructions of the connected equipment

for details.

●The connecting cords are not supplied. Obtain the necessary connecting cords.

●Consult your local Aiwa dealer for optional equipment.

VIDEO/AUX JACKS & MD JACKS

This unit can input analog sound signals through these jacks, Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, VCRs, TV, MD, etc.).

It is convenient to use MD jacks when connecting an MD recorder. Connect the red plug to the R jack, and the white plug to the L jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (digital amplifier, DAT deck, MD recorder, etc.).

Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack.

When the CD DIGITAL OUT (OPTICAL) jack is not being used

Attach the supplied dust cap.

LINE OUT JACKS

This unit can output analog sound signals for all functions through these jacks.

Use a cable with RCA phono plugs to connect audio equipment.

m

Do not connect equipment to the LINE OUT jacks and VIDEO/ AUX jacks simultaneously.

Otherwise, noise is generated and malfunctions may occur.

SUPER WOOFER 4 JACK

Connect an optional powered sub woofer with a built-in-amplifier to the jack.

17 ENGLISH