Aiwa XR-M35 Listening To External Sources, Care And Maintenance, ENGLISH18, To clean the cabinet

LISTENING TO EXTERNAL

SOURCES

—.

POWER -

1-

1-

..l.................. ..

““r

To play equipment connected to the VIDEO/AUX jacks or the MD ,acks, proceed as follows.

?Press the VI DEO/AUX button when playing equipment connected to VIDEO/AUX jacks, or press the MD button when playing equipment connected to MD jacks.

“\llDEO”or “MD” appears on the display.

2 Play the connected equipment.

To change a source name in the display

When the VIDEO/AUX button is pressed, “VIDEO is displayed initiclly. It can be changed to “AUX or “TV.

With the power on, press the POWER button while pressing the VIDf:O/AUX button,

Rep?at the procedure to select one of the names.

CARE AND MAINTENANCE

Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit.

To clean the cabinet

Use a soft and dry cloth,

If the surfaces are extremely dirty, use a soft cloth lightly

moistened with mild detergent solution. Do not use strong solvents, such as alcohol, benzine or thinner as these could damage the finish of the unit.

To clean the heads and tape paths

After every 10 hours of use, clean the heads and tape paths with a head cleaning cassette or cotton swab moistened with cleaning fluid or denatured alcohol. (These cleaning kits are commercially available.)

When cleaning with a cotton swab, wipe the recording/playback head, erasure head, capstans, and pinchrollers.

Recordino/

Pinchroller Erasure head Pinchroller

mJn “

After cleaning the heads and tape paths with a liquid head m cleaning cass-ette or a moistened swab, wait until the cleaned parts are completely dry before inserting the tapes.

To demagnetize the heads

The heads may become magnetized after long-term use, This may narrow the output range of recorded tapes and increase noise. After 20 to 30 hours use, demagnetize the heads with any commercially available demagnetizer.

Care of discs

●When a disc becomes dirty, wipe the disc from the center out with a cleaning cloth.

●After playing a disc, store the disc in its case. Do not leave the disc in places that are hot or humid.

Care of tapes

●Store tapes in their cases after use.

●Do not leave tapes near magnets, molors, television sets, or

any source of magnetism. This will downgrade the sound quality and cause noise.

●Do not expose tapes to direct sunlight, or leave them in a car parked in direct sunlight.

ENGLISH18