Using the USB Duplicator
Main Menu
Functions are selected with the arrow keys. The numbers correspond to the Function listing in the previous section.
Copy
This function makes USB flash copies. The duplicator auto detects and supports Synchronous, and Asynchronous methods of Copy.
Synchronous Copying
In Synchronous Copying all USB flash drives are copied simultaneously. Synchronous Copying is used when the source data is larger than the system buffer (256MB).
1.Load the source flash drive into the USB Duplicator. Use the UP or DOWN arrow to scroll through the menu until Copy is displayed on the LCD screen.
USB Duplicator 1. Copy
OK
ENT ESC
ESC
2.Press the OK button on the display panel. The LCD will display the following status:
USB(963M) | 450M |
0 ready
OK
ENT ESC
ESC
Note: The number beside “USB” is the capacity of the USB flash drive in megabytes. The number to the right is the size occupied by files or images.
3.Load the blank target flash drives into the USB Duplicator. The LCD will display the number of blank media loaded and ready for copying.
USB(963M) | 450M |
3 ready
OK
ENT ESC
ESC