Using the USB Duplicator

2.Press OK and scroll to Media Check. The LCD will display the following status:

[Utility]

3. Media Check

OK

ESC

3.Use UP or DOWN arrow to scroll through the available options:

6.3.1 Safe Check

This function will read all the data on the flash drive with no writing so as to preserve all of the data and format on the drive. Use the UP and Down arrow keys to check the results on all of the drives loaded.

[Media Check] 1. Safe 100%

OK

ESC

(percentage of drive tested)

6.3.2 Normal Check

The controller will read and write in each area of the drive. If one of the areas cannot be written to or read, the display will show an error. Use the UP and Down arrow keys to check the results on all of the drives loaded.

Note: All data and formats will be destroyed with the Normal Check.

[Media Check]2. Normal 100%6.3.3 Setup Range

OK

ESC

(percentage of drive tested)

This function will adjust the percentage of the drive tested in the Safe and Normal Checks. Use the Up and Down arrow keys to change the percentage tested.

[Media Check] 3. Setup Range

OK

ESC

www.aleratec.com23