Using the USB Duplicator

Main Menu

6.1 Format FAT

This function is used to format flash drives with the duplicator. If the original format is FAT, then the format operation will not change the format, but will write over any data on the flash drive.

If the format is not FAT (e.g. NTFS, Linux, or FAT multi-partition) the controller will check the capacity of the flash drive. If the capacity is greater than 2GB, it will automatically use FAT 32 format. If the capacity is less than 2GB, it will use FAT 16.

1.Load the flash drives into the USB Duplicator. Use the UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen.

USB Duplicator 6. Utility

OK

ESC

2.Use the UP and DOWN arrow keys to check the status of any of the flash drives loaded in the machine. Drives inserted in the first port (source) will not be formatted.

[Utility]1. Format FATDo FORMAT Confirm?

 

 

OK

ESC

OK

ESC

www.aleratec.com21