Aleratec 330107 www.aleratec.com17, Asynchronous Copy+Compare - continued

Using the USB Duplicator

Asynchronous Copy+Compare - continued

4.If the Copy fails, the LCD will display the number of flash drives that failed and passed.

Pass: 5	Working
Fail: 0	2

 OK

ENT ESC

 ESC

Note: During Asynchronous Copying you can use the UP and DOWN arrow keys to check each flash drives copying status.

5.When Copy is complete the Compare portion will automatically begin. The LCD will display the status of the copying process.

Compare 15%

925M	 OK
0:18 226M	ENT ESC
0:18 226M	 ESC

6.When Compare is complete the display will show the total, and the number that pass and fail.

Total OK: 5	OK: 5	NG: 0	 OK
1:03	OK: 5	NG: 0	ENT ESC
			 ESC

When Copy+Compare is finished with any of the target drives you can take out the finished drive and put another blank flash drive for Copy+Compare.

Note: When Copy+Compare is in process the Green LED on the front panel is blinking. Do not take out the drive while it is working. When Copy+Compare is finished the Green LED stays on (no blinking). If an error occurs during the process a Red LED will display.

www.aleratec.com17

Contents

Page Copyright/Model Identification Radio/TV Interference Statement Safety Regulations WARNING Table of Contents Subfunctions of Main Menu Items 5, 6, and Copy Page Introduction •Page 2 shows the 1:11 USB Copy Cruiser SA Display Panel Product Features •Stand Alone, no computer required •Copy to, Compare, or Erase up to 11 drives simultaneously 1:11 USB Copy Cruiser SA Display Panel ENT Precautions Installation Operation Transportation Overview Main Menu 4www.aleratec.com Subfunctions of Main Menu Items 5, 6, and The main menu “Information” function has 2 subfunctions. These are: The main menu “Utility” function has 6 subfunctions. These are: www.aleratec.com5 Subfunctions of Main Menu Items 5, 6, and 7 - continued The main menu “Setup” function has 8 subfunctions. These are: 6www.aleratec.com Synchronous Copying Asynchronous Copying Copy Synchronous Copying - continued Finish loading the blank target flash drives, then press the 5.The LCD will display the status of the copying process Copy 15% Percent Complete USB(58M) 450M Reading Pass: Working Fail: Compare Asynchronous Compare 12www.aleratec.com Asynchronous Compare - continued www.aleratec.com13 Copy+Compare Synchronous Copy+Compare - continued Copy 15% 0:32 68M Asynchronous Copy+Compare 16www.aleratec.com Asynchronous Copy+Compare - continued www.aleratec.com17 Capacity Check Information 5.1 USB Info 1.USB Info USB 953M FAT 5.2 System Info Utility 6.1 Format FAT USB Duplicator 6. Utility [Utility] 1. Format FAT Do FORMAT Confirm 6.2 Measure Speed 2. Measure Speed Down [#2] Read: 21.7MB Write: 10.7 MB 6.3 Media Check 3. Media Check 6.3.1 Safe Check [Media Check] 1. Safe 100% 6.3.2 Normal Check [Media Check] 6.4 Quick Erase USB 6.Utility 4.Quick Erase USB 3.Press OK to select. The LCD will display the following status: Do Erase All 6.5 Full Erase USB 5.Full Erase USB 6.6 System Update www.aleratec.com25 6.7 Calc. Checksum 7.Calc. Checksum Checksum AE5277D9 Setup 7.1 Startup Menu USB Duplicator 7. Setup 7. Setup: 1. Startup Menu Startup Menu 7.3 Button Beep 3. Button Beep OFF Button Beep On 7.4 Asyn Hold Time 4. Asyn Hold Time Asyn Hold Time 30sec 7.5 Ignore Size 7.5 Ignore Size - continued 5. Ignore Size 3.Default setting is 3% ; press the arrow keys to change and press OK Ignore Size www.aleratec.com31 7.6 Asynchronous (Enable/Disable) 7.7 Language 7. Language 7.8 Working Mode (Normal/Turbo) Specifications www.aleratec.com33 Technical Support Technical Support Addresses and Phone Numbers XX By e-mail: support@aleratec.com www.aleratec.com FAX at: Service and Support Aleratec, Inc., Limited Warranty Please Note: To Obtain Warranty Service: Technical Support FAX Back Form Aleratec, Inc Technical Support Fax Back Form To: Technical Support Group FAX: