Using the USB Duplicator

2.Press the OK button on the display panel. The USB Duplicator will start to read the source content into the system’s buffer and immediately start copying any loaded target USB flash drives.

USB(58M) 450MReading...

OK

ENT ESC

ESC

3.Load the blank target flash drives into the USB Duplicator. The LCD will display the number of blank media loaded and copying.

Pass: 0Working
Fail: 0

3

 

 

OK

ENT ESC

ESC

Note: When copying is in process the Green LED on the front panel is blinking. Do not take out the drive while it is copying. When copying is finished the Green LED stays on (no blinking). If an error occurs during the copy process a Red LED will display.

4.As finished drives are removed, and new blanks inserted, the display will show the number of copies completed and the number of USB flash drives still in the copying process. If the Copy fails, the LCD will display the number of flash drives that failed and passed.

Pass: 5

Working

Fail: 0

2

 

 

OK

ENT ESC

ESC

Note: During Asynchronous Copying you can use the UP and DOWN arrow keys to check each flash drives copying status.

10www.aleratec.com