Using the USB Duplicator
4.Finish loading the blank target flash drives, then press the OK button on the display panel.
5.The LCD will display the status of the copying process.
Copy |
| 450M |
15% | 0:32 | 68M |
|
|
|
OK
ENT ESC
ESC
6.When Copy is complete LCD will display the following status:
Total: 11/0 |
| OK |
Pass 11 | Fail 0 | ENT ESC |
ESC |
If the Copy fails, the LCD will display the number of flash drives that failed and passed.
7. When Copy is complete the Compare portion will automatically begin. The LCD will display the status of the copying process.
Compare 15%
925M | OK |
0:18 226M | ENT ESC |
ESC |
8.When Compare is complete the display will show the total, and the number that pass and fail.
Total OK: 5 | OK: 5 | NG: 0 | OK |
1:03 | OK: 5 | NG: 0 | ENT ESC |
ESC |
Note: When Copy+Compare is in process the Green LED on the front panel is blinking. Do not take out the drive while it is working. When Copy+Compare is finished the Green LED stays on (no blinking). If an error occurs during the process a Red LED will display.