Using the USB Duplicator

7.1 Startup Menu

Startup Menu allows you to select which function displays first when the USB Duplicator is turned on.

This function selects the menu item that will be the first item shown on the display when you turn on the duplicator. The default setting is Copy.

1.Use the UP or DOWN arrow to scroll through the menu until Setup is displayed on the LCD screen. Press OK.

USB Duplicator 7. Setup

OK

ESC

2.Use the UP or Down arrow to scroll through the Setup options until Startup Menu is displayed on the LCD screen.

7. Setup:1. Startup MenuStartup Menu1.Copy7.2Copy Area

 

 

OK

ESC

OK

ESC

This function supports the selection of Quick Copy or Copy whole area of the source.

7.2.1Only Data area – Quick Copy

If the controller system can verify FAT 16, 32, NTFS, Linux Ext 2, Ext 3 format for the source, the system will copy just the data area when this function is selected. If it cannot verify the format, the system will automatically copy the whole area of the source. For example, if a 2GB source is FAT 32 and it has 50MB of data, the system will copy only the 50MB of data.

7.2.2Whole area – Controller will copy whole area of the source.

If the source is not FAT 16, 32, NTFS, Linux Ext 2, Ext 3 format, the system will copy the entire media, even the blank area. When this function is selected, Quick Copy will not be used. The copy process takes longer.

28www.aleratec.com