Using the USB Duplicator

6.2 Measure Speed

This function will measure the read and write speeds of drives loaded in the ports.

1.Load drives. Use UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen. Press the OK button to select or press ESC to go to the next setting.

USB Duplicator 6. Utility

OK

ESC

2.Press OK and scroll to Measure Speed. The LCD will display the following status:

[Utility]

2. Measure Speed

OK

ESC

3.Use the UP and Down arrow keys to check each drive.

[#2] Read: 21.7MB Write: 10.7 MB6.3 Media Check

OK

ESC

Port position

This function is used to check flash drives with the controller. There are

2 types of checks that can be performed. Safe and Normal. The area to be examined can be set for each check.

1.Load drives. Use UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen. Press the OK button to select or press ESC to go to the next setting.

USB Duplicator 6. Utility

OK

ESC

22www.aleratec.com