Using the USB Duplicator

6.5 Full Erase USB

Full Erase USB is a function what will erase all data on the target USB flash drive.

Note: The Full Erase USB will completely erase data of each of the target flash drives This function will also clear the FAT table in the flash drive. You will not be able to read the flash drive on PC until it is re-formatted.

1.Use UP or DOWN arrow to scroll through the menu until Utility is displayed on the LCD screen. Press the OK button to select or press ESC to go to the next setting.

USB Duplicator 6. Utility

OK

ESC

2.Press OK and scroll to Full Erase USB. The LCD will display the following status:

6.Utility

5.Full Erase USB

OK

ESC

3.Press OK to select. The LCD will display the following status:

Do Erase All

Confirm?

OK

ESC

Press OK for Yes or ESC for No.

4.LCD display will show the following screen when finished.

Pass: 2

Working

Fail: 0

0

 

 

6.6 System Update

OK

ESC

This function is used to update your systems firmware. (Contact Aleratec Technical Support for the latest version.)

www.aleratec.com25