Using the USB Duplicator
Main Menu
Copy+Compare
This function will Copy and Compare USB flash drives. The duplicator auto detects and supports Synchronous, and Asynchronous methods of Copy+Compare.
Synchronous Copy+Compare
In Synchronous Copy+Compare all USB flash drives are copied and compared simultaneously. Synchronous Copy+Compare is used when the source data is larger than the system buffer (256MB).
1.Load the source flash drive into the USB Duplicator. Use the UP or DOWN arrow to scroll through the menu until Copy+Compare is displayed on the LCD screen.
USB Duplicator
3. Copy+Compare
OK
ENT ESC
ESC
2.Press the OK button on the display panel. The LCD will display the following status:
USB(963M) | 450M |
0 ready
OK
ENT ESC
ESC
Note: The number beside “USB” is the capacity of the USB flash drive in megabytes. The number to the right is the size occupied by files or images.
3.Load the blank target flash drives into the USB Duplicator. The LCD will display the number of media loaded and ready for Copy+Compare.
USB(963M) | 450M |
3 ready
OK
ENT ESC
ESC