Allied Telesis AT-2973SX, AT-2973T/4  10 Mb Full  10 Mb Half  100 Mb Full  100 Mb Half  Auto

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide

For Windows Server 2008, Windows Server 2008 R2 or Windows 7 Operating systems, see “Selecting the Advanced Tab in Windows Server 2008, Windows Server 2008 R2, and Windows 7” on page 103.

For Windows Operating systems, see “Selecting the Advanced Tab in Windows Vista” on page 104.

The Advanced tab is shown in Figure 19 on page 102.

2.From the Property list on the Advanced tab, select Speed & Duplex.

3.From the Value list on the Advanced tab, select one of the following:

10 Mb Full

10 Mb Half

100 Mb Full

100 Mb Half

Auto

The Auto setting is a speed of 1000 Mb in full duplex mode. This is the default setting for the adapters.

4.Click OK.

5.If prompted to restart your computer, click Yes.

Although it is not necessary to reboot the system for new adapter properties to take effect, rebooting is recommended to reinitialize all registers.

6.Verify that the port LEDs are operating correctly. See one of the following descriptions:

“AT-2973SX Adapter Physical Description” on page 17

“AT-2973T Adapter Physical Description” on page 18

“AT-2973T/4 Adapter Physical Description” on page 21

119