Allied Telesis AT-2973T/4, AT-2973SX manual = Pxe

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide

Table 8. uxdiag Command Options (Continued)

Command Options		Description
uxdiag -fnvm	Programs the raw image into NVM.
<raw_image>
uxdiag -fump	Specifies the bin file to update UMP
<ump_image>	firmware.
uxdiag -help	Displays the Broadcom NetXtreme II
	User Diagnostics, uxdiag, command
	options.
uxdiag -I <iteration num>	Specifies the number of iterations to
	run on the selected tests.
uxdiag -idmatch	Enables matching of VID, DID, SVID,
	and SSID from the image file with
	device IDs. Used only with -fnvm
	<raw_image>.
uxdiag -log <file>	Logs the test results to a specified log
	file.
uxdiag -mba <1/0>	Enables/disables Multiple Boot Agent
	(MBA) protocol where:
	1	= Enable
	0	= Disable
uxdiag -mbap <n>	Sets the MBA boot protocol, where:
	0	= PXE
	1	= RPL
	2	= BOOTP
	3	= iSCSI_Boot
uxdiag -mbas <n>	Sets the MBA/PXE speed, where:
	0	= Auto
	1	= 10H
	2	= 10F
	3	= 100H
	4	= 100F
	6	= 1000F
uxdiag -mbav <10>	Enables/disables MBA VLAN, where:
	1	= Enable
	0	= Disable
uxdiag -mbavval <n>	Sets MBA VLAN (<65536).
uxdiag -mfw <1/0>	Enables/disables management
	firmware, where:
	1	= Enable
	0	= Disable

159