Allied Telesis AT-2973T/4, AT-2973SX manual 132

Chapter 10: Installing Management Applications

Installing Broadcom Advanced Control Suite 3 and Related Management Applications

The Broadcom Advanced Control Suite 3 (BACS 3) software and related management applications can be installed from the source-file directory or by using the silent install option. See the following:

“Checking .NET Framework Requirements” on page 133

“Using the Installer” on page 134

“Using the Silent Install Option” on page 134

After you use the source-file directory or the silent install option, the following features are installed on your system:

Control Suite. Broadcom Advanced Control Suite 3 (BACS 3).

BASP. Installs Broadcom Advanced Server Program.

SNMP. Installs the Simple Network Management Protocol subagent.

CIM Provider. Installs the Common Information Model provider.

Note

Ensure that the Broadcom network adapter(s) is physically installed in the system before installing BACS 3.

Note

Before installing Broadcom Advance Control Suite 3, verify that

.NET Framework 2.0, or above, is installed.

Note

Before you begin the installation, close all applications, windows, or dialog boxes.

Note

To use the TCP/IP Offload Engine (TOE), you must have Windows

Server 2003 with Service Pack 2 (SP2).

132