Chapter 3: Installing Broadcom Boot Agent Driver Software

Setting Up the

BIOS

Note

The message prompting you to press CTRL+S is displayed once for each Broadcom NetXtreme II adapter you have in your system that has MBA enabled. The messages are displayed in the same order as the assigned adapter device number.

3.Use the UP ARROW and DOWN ARROW keys to move to the Boot Protocol menu item.

Note

If you have multiple adapters in your system and you are unsure which adapter you are configuring, press CTRL+F6, which causes the port LEDs on the adapter to start blinking.

4.Use the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT ARROW keys to move to and change the values for other menu items, as desired.

5.Press F4 to save your settings.

6.Press ESC when you are finished.

To boot from the network with the MBA, make the MBA enabled adapter the first bootable device under the BIOS. This procedure depends on the system BIOS implementation. Refer to the user manual for the system BIOS implementation for instructions.

44

Page 44
Image 44
Allied Telesis AT-2973SX, AT-2973T/4 manual Setting Up, Bios