Allied Telesis AT-2973SX, AT-2973T/4 manual Bindings = BXND20X BXND20X, DriverName = BXND20X$

Chapter 5: Installing the NDIS2 Driver Software

5.Edit the Autoexec.bat file by adding the following lines:

C:\ LANMAN\NETBIND.EXE C:\LANMAN\NET START WORKSTATION C:\LANMAN\NET USE drive letter: \\server name\resource name

6.Edit the Protocol.ini file (located in C:\LANMAN) to configure the driver to bind with NetBEUI or any other protocols.

Here is an example:

[PROTOCOL MANAGER] DriverName = PROTMAN$ [NETBEUI_XIF] DriverName = netbeui$

BINDINGS = BXND20X [BXND20X]

DriverName = "BXND20X$"

7.Restart the computer to complete the installation.

Note

The driver loads during system configuration and displays the Broadcom banner, controller name, MAC address, IRQ number, detected line speed, and the controller BusNum and DevNum. If the driver fails to load, an initialization fail message is displayed. For more information about the BusNum and DevNum keywords, see “Using Keywords for the Drivers” on page 63.

62