Allied Telesis AT-2973SX, AT-2973T/4 manual Replacing the Bracket, Removing the Low-Profile Bracket

Chapter 2: Installing the Hardware

Replacing the Bracket

Both the AT-2973SX and AT-2973T adapters are shipped with the low- profile bracket attached to the adapter. In addition, the standard bracket is included in the shipment. Depending on your PC, you may need to replace the bracket attached to your adapter.

Note

The AT-2973T/4 adapter is shipped with a standard bracket attached to the card. A low-profile bracket is not included with this adapter.

The following procedure describes how to remove the low-profile bracket from the adapter and replace it with the standard bracket. You can also use this procedure to remove the standard bracket and replace it with the low-profile bracket.

To replace the low-profile bracket with the standard bracket, do the following:

1.Remove the screws that attach the bracket to the adapter. See Figure 7.

ACT LNK

ATI

Figure 7. Removing the Low-Profile Bracket

32