Allied Telesis AT-2973T/4, AT-2973SX manual Installing, Driver Software, NetBEUI

Installing the

DOS NDIS2

Driver Software

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide

6.Create the appropriate Autoexec.bat file in drive A for the chosen protocol as shown:

TCP/IP

Here is an example of the TCP/IP autoexec.bat file:

path=a:\net a:\net\net initialize a:\net\netbind.com a:\net\umb.com a:\net\tcptsr.exe a:\net\tinyrfc.exe a:\net\nmtsr.exe a:\net\emsbfr.exe a:\net\net start basic

net use z: \\SERVERNAME\SHARENAME

NetBEUI

Here is an example of the NetBEUI autoexec.bat file:

SET PATH=A:\NET

A:\NET\NET START BASIC

net use z: \\SERVERNAME\SHARENAME

7.Create a Config.sys file on the startup disk in drive A as shown:

files=30

device=a:\net\ifshlp.sys

lastdrive=z

To install the DOS NDIS2 Driver Software on the hard disk, do the following:

1.Verify that the system has Microsoft LAN Manager 2.2 installed, with a protocol such as NetBEUI configured.

2.Create a folder on your hard disk to store the NDIS 2.01 driver.

Example: C:\LANMAN

3.Copy the BXND20X.dos file to this folder.

4.Edit the Config.sys file by adding the following lines:

DEVICE = C:\LANMAN\PROTMAN.DOS DEVICE = C:\LANMAN\BXND20X.DOS

DEVICE = C:\LANMAN\NETBEUI.DOS

61