![](/images/new-backgrounds/1126648/12664863x1.webp)
Chapter 3: Installing the Enclosure
Required Tools and Supplies
Tools
Additional Supplies
The following tools and supplies are required to install the enclosure:
Have the following tools on hand before you install the enclosure or gateway:
3/8” drill
Drill bit for the size of wall anchor or fastener you intend to use for the enclosure
Flat head and #2 Phillips screwdrivers
SM fusion splicer and required fiber handling tools
9/32 in. and 3/8 in. nut drivers
Pliers
5/32 hex security driver
You may also need the following supplies:
Mounting screws or bolts suitable for the mounting location and material.
Silicone sealant
Electrical tape
A total of four
Fiber cleaning materials
One 1m SC/UPC SM pigtail
One SM fusion splice protector
One earth ground rod, if not already present
#6 gauge solid copper ground wire
Console cable
Power cable
Power supply
32 | Section I: Outdoor Installation |