Chapter 5: Installing the Gateway Indoors
Required Tools and Supplies
Tools
Additional Supplies
The following tools and supplies are required to install the gateway:
Have the following tools on hand before you install the enclosure or gateway:
Flat head and #2 Phillips screwdrivers
Wire cutters
Crimping tool
You may also need the following supplies:
Silicone sealant
Electrical tape
Two
Console cable
Power cable
Power supply
Fiber cleaning materials (see Appendix B, “Cleaning Fiber Optic Connectors” on page 91)
Plywood mounting surface (see “Fastening the Plywood Mounting Surface to a Wall and Preparing the Gateway” on page 74 for specifications)
Accessory kit for indoor installation
You will need the following items to create a ground wire for the DC terminal block:
One piece of #18 AWG stranded wire,
A
72 | Section II: Indoor Installation |
