Allied Telesis AT-iMG646PX-ON, AT-EN646 manual Preparing for the Installation

AT-iMG646xx Series Intelligent Multiservice Gateway and AT-EN646 Enclosure Installation Guide

Preparing for the Installation

To prepare for the installation, perform the following procedure:

1. Remove all components from the shipping package.

Note

Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

2.Ensure that the following components are included in the gateway package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

ˆAn AT-iMG646xx series intelligent multiservice gateway

ˆAccessory kit that contains:

-Four long self-tapping pan head Phillips screws

-Four short pan head machine screws

-Four wood screws

-Four plastic wall anchors

-One10-32 x 1-inch stud that has one small split washer, one regular washer, and two Kepnuts on it

-One ring lug

-One DC terminal block

ˆThis installation guide

Section II: Indoor Installation 73