5 Press 
or 
to tune in the desired station.
Holding down 
or 
will change the frequency continuously.
•“DIGITAL” is displayed when a digital radio station is received.
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio station you wish to store in the preset memory.
2 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
3 Press the joystick up or down to select PRESET MEMORY, then press the joystick right.
4 Press the joystick up or down to select any one of the preset numbers PRESET1 through PRESET6, then press 
/ 
/ENTER.
The selected station is stored.
The display shows the band, preset number and station frequency memorized.
•A total of 18 stations can be stored in the preset memory (6 stations for each band;
•If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.
Automatic Memory of Station Presets
1 Press and hold 
for at least 2 seconds repeatedly until the desired radio band is displayed.
2 Press and hold 
/ 
/ENTER for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into PRESET1 to PRESET6 in order of signal strength.
When the automatic memory has been completed, the tuner goes to the station stored in preset location No. 1.
•If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press and hold 
for at least 2 seconds repeatedly until the desired band is displayed.
Changing Stations by the Commander
2 Press 
or 
to select a preset number (P01 to P06).
The selected station is received.
Recalling by the FUNCTION screen
2 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
3 Press the joystick up or down to select PRESET CALL, then press the joystick right.
4 Press the joystick up or down to select any one of the preset numbers PRESET1 through PRESET6, then press 
/ 
/ENTER.
The preset station is received.
The display shows the band, preset number and frequency of the station selected.
Setting Analog Mode (HD Radio mode only)
While receiving HD radio, you can switch to analog signal mode, even in areas that receive digital radio station signals.
1 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
2 Press the joystick up or down to select ANALOG MODE, then press the joystick right.
3 Press the joystick up or down to select ON, then press 
/ 
/ENTER.
