Video CDs with multiplex audio
1 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
2 Press the joystick up or down to select AUDIO, then press 
/ 
/ENTER.
The left and right channels will be output as shown in the figure below.
<Monitor display>
AUDIO L/R 
AUDIO L/L 
AUDIO R/R 
AUDIO L/R
•If a DVD player/DVD changer with
Switching the Subtitles (Subtitle Language) (DVD only)
With DVDs on which multiple subtitle languages are recorded, the subtitle language can be switched during playback; moreover, subtitles can be hidden.
1 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
2 Press the joystick up or down to select SUB
TITLE, then press 
/ 
/ENTER.
The subtitle language stored in the disc is changed, then turns off.
•There may be a delay before the selected subtitle appears.
•Not all discs will allow changing the subtitles during playback. In these cases, select subtitles from the DVDs menu.
•The subtitle language selected becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that language, the disc’s default language is selected instead. However, the subtitle language may differ depending on the disc.
•For some discs, the subtitles will be displayed even when this is set to off. However, the subtitle language may differ depending on the disc.
Switching the Angle (DVD only)
On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.
1 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
2 Press the joystick up or down to select ANGLE, then press 
/ 
/ENTER.
The angle switches between the angles recorded on the disc.
•Some time may be required for the angle to change.
•Depending on the disc, the angle may switch in one of two ways.
-Seamless: The angle switches smoothly.
-
Switching from the disc menu
For some discs, the audio language, angle and subtitles can be switched from the disc menu.
1 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
2 Press the joystick up or down to select MENU, then press 
/ 
/ENTER.
3 Select an item to confirm it.
See “If a menu screen appears” on page 20.
