SIRIUS Radio:
*1 Channel name, category, song name, etc., are displayed in one screen.
*2 XM mode only: The information display appears when ON is set in “Setting the Auxiliary Data Field Display” (page 17).
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12 character alphanumeric number. It is printed on a label found on the SAT Receiver.
It can also be displayed on the screen of the
1 Press 
/
/ENTER to select the channel number turing mode.
2 While receiving a SAT Radio band, press 
or
to select channel "0" for XM, or to select channel "255" for SIRIUS.
3 The unit displays the ID number.
4 To cancel the ID number display, change the channel.
•You cannot use “O,” “S,” “ I,” or “F” for the ID Number. (XM radio Receiver only)
•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.
Storing Channel Presets
1 Press and hold 
/MENU/FUNC. for at least 2 seconds after selecting a desired band.
The FUNCTION screen is displayed.
2 Press the joystick up or down to select PRESET MEMORY, then press the joystick right.
3 Press the joystick up or down to select any one of the preset numbers PRESET1 through PRESET6, then press 
/
/ENTER.
The selected station is stored.
4 Repeat the procedure to store up to 5 other channels onto the same band.
To use this procedure for other bands, simply select the desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory (6 channels for each band;
•If you store a channel in a preset already being used, the current channel will be replaced with the new one.
Receiving Stored Channels
1 Press and hold 
for at least 2 seconds repeatedly until the desired band is displayed.
2 Press and hold 
/MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
3 Press the joystick up or down to select PRESET CALL, then press the joystick right.
4 Press the joystick up or down to select any one of the preset numbers PRESET1 through PRESET6, then press 
/
/ENTER.
The selected station is received.
•During reception, you can change the station by pressing 
or 
.
