Setting the Time
Setting item: CLOCK ADJ
Further setting items: HOUR / MINUTE
Setting content:
HOUR: Adjust the hour.
MINUTE: Adjust the minute.
*The setting content differs depending on the selection in "Setting the Time Display" (page 12).
•Pressing and holding the joystick left or right will change the setting item continuously.
Setting Daylight Saving Time
Setting item: DAYLIGHT TIME
Setting content: OFF / ON
ON: Place the Summer Time mode ON. The time advances by one hour.
OFF: Return to the ordinary time.
Sound (Beep) Guide Function
Setting item: BEEP
Setting content: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide beep will not be produced when a button on the commander is pressed.
Turning the Commander Vibration ON or
OFF
You can turn the commander vibration ON or OFF during operation.
Setting item: REACTOR
Setting content: OFF / ON
OFF: Turns off vibration during operation.
ON: Turns on vibration during operation.
Setting the Scroll
Scroll display is available if CD text, folder name, file name or tag information is entered.
Setting item: SCROLL AUTO
Setting content: OFF / ON
ON: Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed.
•Scroll display of the song, artist and album name is enabled when iPod is connected.
•Short/Long station name, song, artist and album name scrolling are displayed in HD Radio mode.
SYSTEM Setup
System Setup Operation
To display the System mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the System mode screen.”
The following steps 1 to 5 are common operations to each “Setting item” of SYSTEM Setup. Refer to each section for details.
1 Press and hold MUTE/RTN/SETUP for at least 2 seconds.
The SETUP screen is displayed.
2 Press the joystick up or down to select SYSTEM SETUP, then press the joystick right.
The SYSTEM SETUP screen is displayed.
Display Example for the SYSTEM SETUP Screen
