Amana RBG635T, RW635T, RL635T Usage, Oven Signal, Oven Operation, Memory Set, Press STOP/RESET

Usage

Oven Signal

Oven features an entry signal and end-of-cycle signal programmed at factory. Signal can be deactivated. Entry signal sounds whenever a pad is pressed. It confirms oven has read and accepted instruction. End-of-cycle signal sounds at end of cooking time.

To cancel entry signal or end-of-cycle signal

1.Press and hold MEMORY SET for five seconds. "OP:10" or "OP:11" displays. See chart at right for definition of signal options.

2.To change signal option, press 0 to deactivate entry signal. Press 1 to activate entry signal.

3.Press MEMORY SET. "OP:20" or "OP:21" displays. Change signal option for end-of- cycle signal, if desired.

4.Advance to next signal option by pressing

MEMORY SET.

5.To exit signal option mode, press STOP/RESET once.

Option	Option Function
Number
OP:10	Prevents signal from sounding when a
	pad is pressed.
OP:11*	Allows signal to sound when a pad is
	pressed.
OP:20	Prevents end-of-cycle signal from
	sounding when heating time is over.
OP:21*	Allows signal to sound at end of
	heating time and timer cycle.

*As shipped from factory.

Oven Operation

A.Oven light comes on when door is opened and also when oven is operating.

B.Rotawave® System beams microwave energy directly to food in uniform pattern for even cooking results.

C.• Turntable will randomly rotate clockwise or counter-clockwise, determined by turntable stop position.

•When defrosting or cooking (especially large items, such as poultry), verify turntable rotates freely.

D.Set the Clock

1.Press CLOCK. "CLOCK" displays.

2.Enter time of day. For example, 10:35 (a.m. or p.m.) press number pads 1,0,3,5.

3.Press CLOCK again. Clock is set. If oven power is interrupted all programming instructions erase. When power is reconnected, dashes appear in display. Reset clock as indicated above.

E.Check operations of interlock systems. The START and STOP/RESET pads turn oven on and off. Microwave energy is generated only when door is closed, cooking time is set, and START is pressed. In addition, oven has interlock switches to assure no microwave energy is generated when door is open. To check or remove food before cooking time is elapsed, either press STOP/RESET or open oven door to turn oven off.

To check operation of START, STOP/RESET and interlock switches:

1.Place a glass of water in oven. Close door.

2.Press TIME ENTRY.

3.Press 5,0 (50 seconds).

4.Press START. Oven should operate and oven light should come on.

5.Press STOP/RESET. Oven and oven light should shut off immediately.

6.Open oven door fully. Oven light should come on when door is opened.

7.Press STOP/RESET.

If under any of the preceding conditions oven does not operate as stated, do not use it. See "Factory Service Centers" section on back page.

8