Manuals / Panasonic / Photography / Camera Accessories

Panasonic AWRP120GJ Enabling or disabling the CAM INF function, Cam Inf,    

Models: AWRP120GJ

1 60

Download 60 pages 9.42 Kb

Page 35

Setting the functions for when the unit is linked with the switcher (continued)

CAM INF function

You can display the remote camera setting information acquired by the unit on the switcher AUX bus output images or multi view images.

Enabling or disabling the CAM INF function

1.Press the MENU button..

2.Open SW FUNCTION menu [42]..

3.Turn the F1 dial to display the “8.  CAM INF” item..

8.CAM INF

Off

4.Turn the F2 dial to select “On” or “Off”, and then press the F2 dial to confirm the selection..

On	: Enables the CAM INF view function.
Off	: Disables the CAM INF view function.

zzEnabling and disabling the CAM INF function can be assigned to a USER button.

Open USER BUTTON menu [35], display one of the “1.  USER1” to “8.  USER8” items, and set “CAMINF”..

zzWhen the USER button with “CAMINF” assigned is pressed, the operation is as follows.

Button indicator on : Enables the CAM INF function.

Button indicator off : Disables the CAM INF function.

Selecting the remote camera setting information to superimpose on the images output from the switcher

1.Press the MENU button..

2.Open SW FUNCTION menu [42]..

3.Turn the F1 dial to display any of the “9.  CAMINF_ FORMAT” to “16.  CAMINF_ALARM” items..

9.CAMINF_FORMAT

	On
	～
16.CAMINF_ALARM
	On
9.  CAMINF_FORMAT	: 1 Video format
	(This is left blank when the video
	format of the remote camera cannot
	be recognized.)
10.  CAMINF_CNAME	: 2 Remote camera name
11.  CAMINF_SCENE	: 3 Shooting mode
12.  CAMINF_GAIN	: 4 Gain value
13.  CAMINF_SHUTER	: 5 Shutter information (ON/OFF,
	shutter value)
14.  CAMINF_IRIS	: 6 Iris value
15.  CAMINF_FILTER	: 7 Filter information
16.  CAMINF_ALARM	: 8 Remote camera alarm information
	 	 
		
1080/59i	USER
1/100	AUTO

AW-HE120



4.For each of the items, turn the F2 dial to select “On” or “Off”, and then press the F2 dial to confirm the selection..

On	:	Enables display on the switcher.
Off	:	Disables display on the switcher.

35

Image 35

Panasonic AWRP120GJ Enabling or disabling the CAM INF function, Cam Inf, Caminfformat CAM INF Alarm,    

Contents

Operating Instructions Illustrations and screen images in this manual About trademarks and registered trademarksCopyrights AbbreviationsContents How to turn on the power of the remote cameras How to turn on and off the power of the remote cameras„„Turning off the power of all the cameras How to turn off the power of the remote camerasTurning off the power one camera at a time Turning off the power of multiple camerasBars button Making image adjustments for the selected remote cameraColor adjustment section ZzR and B pedestalAutomatically adjusting the white balance Setting the gainSetting the pedestal Setting the white balanceAutomatically adjusting the black balance Setting the black balanceManually adjusting the white balance R and B gain settings Auto tracking white adjustment ATWSetting the shutter speed Setting the detailAdjusting the shutter speed Setting the shutter modeAW‑HE50 Setting the shooting mode Scene 1 to SceneSelecting an ND filter with the User buttons User 1 to User Setting an ND filterND Filter ND1Operate the OSD menu Hold down the Camera OSD button to turn on its indicatorHold down the Camera OSD button to turn off its indicator Operating the osd menu of a remote cameraPmem Operating preset memory PmemZzLighting of number button indicators ZzChanging pagesDeleting preset memory Delete Registering preset memory StoreRecalling preset memory Recall Iris Scope Mode aScope settings and recalled items Recalled item Setting SpeedPM GRP1 Mode Separate Operating preset memory groups Pmem GroupSetting the operation mode SEPARATE/ ALL Creating preset memory groupsPressing a button to recall a preset memory group Recalling preset memory groupsRegistering the preset memory to recall when in ALL mode PM GRP1 Mode ALL3m50s Remained Operating tracing memory TmemRegistering tracing memory Store CAM1 TmemPress Stop button Recalling tracing memory RecallStandby Recall RecallingRestoring Restoring tracing memory RestoreStandby Restore Deleting tracing memory DeleteRecalled item Setting Setting the items to recall when recalling tracing memoryT Curv Configuring the remote camera operation settingsSetting the PAN/TILT lever inclination and speed „„Operation of Speed dialSetting the zooming direction Setting the pan, tilt, zoom, and focus operation directionsSetting the panning direction Setting the tilting directionSpeed with Z Off Setting the minimum lens zoom start speedSetting the focusing direction MIN Speed„„When other remote camera Setting procedure„„When AW-HE50, AW-HE60, or AW-HE120 Controlling a heater or fan Returning a remote cameras to its home positionControlling a defroster Controlling a wiperButton indicator on or blinking Configuring the unit operation settingsEnabling or disabling operation with the Enable buttons Press the Enable buttonEnabling Menu operation Enabling or disabling menu operationDisabling Menu operation LCD Backligh T Off Switching the focus operation and iris operationSetting the LCD panel backlight FOCUS/IRIS StandardUSER1 Assigning functions to the User buttonsINPUT1 Setting linking with a switcher„„Settings for the connection between unit and switcher „„Settings on the switcherBUS AUX Buscont functionEnabling or disabling the Buscont function BuscontEnabling or disabling the Camera Select function Setting the Focus Assist functionFocus Assist function Camera Select view functionT/Z Control CAM Tally IP functionEnabling or disabling the Tally IP function TallyipCAM INF Caminfformat CAM INF AlarmCAM INF function Enabling or disabling the CAM INF functionLoad Memory card operationsZzMemory cards SaveSaving data to a memory card Save Initializing a memory card InitDeleting the files saved to a memory card Delete Loading data from a memory card LoadTally OUT Tally settings„„Settings on remote cameras Tally IN1Power No Alarm Checking alarm informationDisplaying alarm information ALL Setup Returning the unit to the factory default state InitializeSetting items stored on the unit SetupInitialize ALL Returning the unit to the factory default stateSetting items stored on the unit AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10Installing the software Setup SoftwareEnter the IP addresses in the IP address boxes Registering the unit in Setup SoftwareSettings for connecting with the remote cameras and switcher Displaying the Setting tab Initializing the IP addresses Executing auto IP settingAcquiring the connection settings Changing the connection destination IP addressesClicking Refresh clears the user name and password Setting user authenticationEnter the same password as above in the Retype password box Campinp POS Campinp ModeOperations of AW-HE2 Campinp CTLDial/button Setting item Remote camera Table of setting items dedicated dials and buttonsFilm Table of setting items menusVideo Table of setting items menus SW Setup SW CTL Operation lock When starting up and switching camera groupsPreset memory MessagesMessages IP connection settingsMemory card Xx Menu IndexIndex プロフェッショナルAVビジネスユニット