42
<Setting items stored on the unit (cont.)> √: Target, ―: Not target
Button
number Menu name Setting item INITIALIZE
ALL SETUP
[49] SYSTEM 2. SYSTEM VER ― ―
3. PROGRAM VER ― ―
4. FPGA VER ― ―
zFor the factory default settings, refer to “Table of setting items (menus)” (pages 53 to 55).
Returning the unit to the factory default state (INITIALIZE) (continued)
Returning the unit to the factory default state
1. Press the MENU button.
2. Open SYSTEM menu [49].
3. Turn the F1 dial to display the “1. INITIALIZE” item.

1.INITIALIZE

ALL

4. Turn the F2 dial to select “ALL” or “SETUP”, and then
press the F2 dial to confirm the selection.
INITIALIZE is executed.
ALL : Restores all settings to the factory default state (executes
INITIALIZE).
SETUP : Restores only some settings to the factory default state
(executes INITIALIZE).
zThe unit needs to be rebooted after selecting “ALL” and then
executing INITIALIZE. Turn the power off and then back on.
Note