Recalling tracing memory (RECALL)
1. Press one of the camera selection buttons [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated..
2. Press the TMEM button to turn on its indicator..
The tracing memory status appears.
The indicators of number buttons with registered tracing memory turn on.
Selected camera number
CAM1 TMEM
3m50s Remained.
Remaining possible recording time (max.. 5 m 00 s)
| Note |
9. Press STOP button [12].. | zzA button with no tracing memory registered does not turn on |
even when it is a button with preset memory registered. |
3. Press one of the number buttons that has its indicator turned on to specify the tracing memory number..
The remote camera moves to the start position.
The indicators of the number button that was pressed and START button [11] blink. (Recall standby state)
TM03:0m00s/ 0 m 5 9 s
Standby Recall.
4. Press START button [11]..
The tracing memory is recalled and the remote camera starts moving.
The indicator of START button [11] turns on.
Total time of tracing
Current recall memory during recalling
Tracing memory number position
TM03:0m20s/ 0 m 5 9 s
Recalling.
5. When the recording time elapses, the remote camera stops automatically..
The number button that was blinking turns on, the indicator of START button [11] turns off, and the process returns to step 2. zzWhen STOP button [12] is pressed during recalling, recalling stops
and the process returns to step 2.
19