Panasonic AWRP120GJ Operations of AWHE2

51

Operations of AW‑HE2

AW-HE2 HD integrated cameras can be operated from the unit.

This section describes the operations which are different from the

corresponding operations of other remote cameras.

zThe method for connecting AW-HE2 and the unit is the same as

that for connecting AW-HE2 and AW-RP50. Refer to the operating

instructions supplied with AW-HE2.

Note

<Invalid operations>

Color adjustment

section

R/B GAIN dial, R/B PED, dial, PED dial, GAIN

button, DETAIL button, AUTO GAIN button, ABB

button

Focus, zoom, and

iris section

FOCUS dial, Auto focus button,

One-touch auto focus button, FOCUS SPEED

dial

User button

section

SCENE 1 to SCENE 4 buttons (*1)

(*1) Even if you press these buttons while the SHIFT button indicator is

on, the operations will have no effect.

(The shooting mode cannot be selected.)

<Operations which are different>

PAN/TILT lever When the zoom position is the WIDE end

side, the output images do not change even if

the lever is operated.

Preset memory zThe preset numbers that can be registered

and recalled are PMEM 1 to PMEM 9

(page number: Page 1).

zPRESET SCOPE and PRESET SPEED

cannot be set.

Tracing memory Up to nine tracing memory can registered and

recalled for each camera.

SD card SAVE and LOAD of the MEM and CAM items

cannot be executed.

USER buttons If the following settings are assigned, PinP

display of AW-HE2 can be operated with the

USER buttons.

CAM_PINP CTL:

Displays or hides PinP.

Each press of the button switches in the

order of display PinP → hide PinP →

display PinP, and so on.

CAM_PINP MODE:

Switches the control target (control mode)

of the PAN/TILT lever and ZOOM button.

Each press of the button switches in the

order of PinP → main screen → PinP, and

so on.

CAM_PINP POS:

Changes the display position of PinP.

Each press of the button switches in the

order of top right → bottom right → bottom

left → top left → top right, and so on.

zFor the PinP display function of AW-HE2, refer to the operating

instructions supplied with AW-HE2.

.

<Invalid menu operations>

Menu Setting item

SHUTTER [21] 1. SHUTTER

2. SPEED

ND FILTER [22] 1. ND FILTER

PTZ ADJUST [30] 2. SPEED WITH Z

3. LIMIT UP

4. LIMIT DOWN

5. LIMIT LEFT

6. LIMIT RIGHT

Contents

Main Operating Instructions <Operations and Settings> Remote Camera Controller Model No. AW-RP120G ENGLISH About trademarks and registered trademarks Copyrights Illustrations and screen images in this manual Protection of personal information Abbreviations Contents How to turn on and off the power of the remote cameras How to turn on the power of the remote cameras 1. 2. 2. 3. How to turn off the power of the remote cameras How to turn on and off the power of the remote cameras Turning off the power one camera at a time 1. 2. Making image adjustments for the selected remote camera <Color adjustment section> Setting the gain 1. PED : +150 GAIN : 18dB 2. Setting the black balance Automatically adjusting the black balance 1. Manually adjusting the black balance (R and B pedestal adjustment) 2. 3. 4. Selecting the color bars Setting the detail 2. 1. DETAIL : On LEVEL : LOW Setting the shooting mode (SCENE 1 to SCENE 4) 1. 2. Setting an ND filter 2. 1.ND FILTER ND1 3. Selecting an ND filter with the USER buttons (USER 1 to USER 8) Operating the osd menu of a remote camera 1. 2. 3. Operating preset memory (PMEM) zChanging pages zLighting of number button indicators Registering preset memory (STORE) Recalling preset memory (RECALL) Deleting preset memory (DELETE) Setting the operation items for when preset memory is recalled (PRESET SCOPE) Operating preset memory (PMEM) 1. 2. 3. SPEED : 30 SCOPE : MODE A Operating preset memory groups (PMEM GROUP) Setting the operation mode (SEPARATE/ ALL) SEPARATE 3. 4. Creating preset memory groups Recalling preset memory groups Pressing a button to recall a preset memory group 1. 2. Recalling a preset memory group by GPI input Operating tracing memory (TMEM) Registering tracing memory (STORE) 1. [CAMERA SELECT/GROUP SELECT] to select the remote camera to be operated. 2. 3. Recalling tracing memory (RECALL) 1. 2. 3. TM03:0m00s Standby Recall. Deleting tracing memory (DELETE) 1. 2. 3. 4. Restoring tracing memory (RESTORE) Setting the items to recall when recalling tracing memory 1. SPEED : SCOPE : MODE A 2. Configuring the remote camera operation settings Adjusting the operation speed of the pan, tilt, zoom, and focus Operation of SPEED dial Setting the PAN/TILT lever inclination and speed 3. Setting the pan, tilt, zoom, and focus operation directions Setting the minimum lens zoom start speed Setting the speed of the pan and tilt operations for telephoto shooting Setting the movement ranges (limiter function) of a remote camera Configuring the remote camera operation settings 2. 3. 4. 5. Returning a remote cameras to its home position Configuring the remote camera operation settings 3. 4. Controlling the peripheral devices connected to a remote camera Configuring the unit operation settings Enabling or disabling operation with the ENABLE buttons 1. Enabling or disabling operation of the ENABLE buttons by menu operation 3. 4.ENABLE BUTTON ACTIVE 4. Enabling or disabling menu operation Switching the focus operation and iris operation 3. 1.FOCUS/IRIS STANDARD 4. Setting the LCD panel backlight Assigning functions to the USER buttons 2. 3. USER 8) you want to set. 4. 1.USER1 ND1 Setting linking with a switcher Settings for the connection between unit and switcher Settings on the switcher Registering the camera numbers that will correspond to the image inputs of the switcher Enabling or disabling the function for linking with the switcher Setting the functions for when the unit is linked with the switcher BUSCONT function Enabling or disabling the BUSCONT function 3. 2.BUSCONT Off FOCUS ASSIST function Setting the FOCUS ASSIST function 3. 4.FOCUS ASSIST Off 4. TALLY IP function Enabling or disabling the TALLY IP function 3. 6.TALLY_IP Off 4. Memory card operations zMemory cards Initializing a memory card (INIT) Memory card operations 2. 3. 4. Loading data from a memory card (LOAD) Memory card operations 1. 2. 3. 4. Tally settings Registering the camera numbers that will correspond to the tally inputs 2. 3. 4. Setting the sending of tally information from the unit to remote cameras Checking alarm information Displaying alarm information 2. 3. 1.POWER NO ALARM Returning the unit to the factory default state (INITIALIZE) <Setting items stored on the unit> Returning the unit to the factory default state (INITIALIZE) Returning the unit to the factory default state 2. 3. 1.INITIALIZE ALL 4. Control interface for external devices TALLY/GPI (JST: JBY25S1A3F(LF)(SN)) Example of TALLY IN and GPI IN connections Provide contact inputs. AWRP120 Control interface for external devices REMOTE (JST: JEY9S1A3F(LF)(SN)) TO PAN/TILT HEAD 1 to 5 connectors (RJ45) LAN connector (RJ45) Setup Software Registering the unit in Setup Software Page Setup Software Displaying the Setting tab 1. Setting user authentication Operations of AWHE2 Table of setting items (dedicated dials and buttons) Table of setting items (menus) Page Table of setting items (menus) Messages Messages Index x x