Panasonic AWRP120GJ Operating the osd menu of a remote camera, Operate the OSD menu

Operating the osd menu of a remote camera

To set the advanced settings of a remote camera, operate the menu superimposed on the image output of the remote camera (this menu is referred to as the OSD menu in this manual). The OSD menu of a connected remote camera can be operated from the unit.

F1 dial

CAMERA OSD button

F2 dial

EXIT button

1.Hold down the CAMERA OSD button to turn on its indicator..

The OSD menu appears on the selected remote camera and becomes able to be operated from the unit.

2.Operate the OSD menu..

Use the F1 dial, F2 dial, and EXIT button to operate the OSD menu. Operation differs depending on the model connected.

<Table of operations>

Remote camera		Dial/button operation	OSD menu operation
AW‑HE50	Turn the F1 dial.		zzMoves the items (*1).
			zzSelects a setting (*2).
AW‑HE60
	Press the F1 dial.		Confirms the change to the selected setting.
AW‑HE120
	Press the EXIT button.		Cancels the selected setting.
AK‑HC1500	Turn the F1 dial.		zzMoves the items (*1).
			zzSelects a setting (*3).
AK‑HC1800
	Press the F1 dial.		Confirms the change to the selected setting.
AW‑HE870
	Press the EXIT button.		Cancels the selected setting.
AW‑E350	Turn the F1 dial.		Moves the items (*1).
	Press the F1 dial.		Confirms the sub-menu selection.
AW‑E650
AW‑E750			zzChanges the setting directly (*4)
AW‑E860	Turn the F2 dial.
AW‑HE100			zzConfirms the sub-menu selection.
(*1) Turn clockwise		: Moves the items up.
Turn counterclockwise		: Moves the items down.
(*2) Turn clockwise		: Changes the setting in the plus (+) direction.
Turn counterclockwise		: Changes the setting in the minus (–) direction.
(*3) Turn clockwise		: Changes the setting in the minus (–) direction.
Turn counterclockwise		: Changes the setting in the plus (+) direction.

(*4) Turning the dial changes the setting and instantaneously reflects the new value on the remote camera.

Turn clockwise	:	Changes the setting in the plus (+) direction and confirms the value.
Turn counterclockwise	:	Changes the setting in the minus (–) direction and confirms the value.

3.Hold down the CAMERA OSD button to turn off its indicator..

The menus of the unit become able to be operated.

Notes

zzWhen the unit is operating the OSD menu of a remote camera, the CAMERA OSD button lighting state and OSD menu display state may no longer match and OSD menu operation may not be able to be performed properly if the OSD menu OFF operation is performed for the same remote camera from, for example, another remote camera controller or a wireless remote controller.

In such a case, hold down the CAMERA OSD button on the unit, and after the CAMERA OSD button lighting state (off) and OSD menu display state (OSD menu hidden) match, hold down the CAMERA OSD button again and then perform the operation.

zzIf a camera selection button [CAMERA SELECT/GROUP SELECT] is pressed to switch to another remote camera to control from the unit during the display of the OSD menu of a remote camera, the OSD menu of the remote camera that was selected disappears.

zzFor details on the menu items that are displayed, check the operating instructions for the corresponding model.

12