Controlling a defroster, Controlling a wiper

Configuring the remote camera operation settings (continued)

Returning a remote cameras to its home position

Position the remote camera in the vertical and horizontal directions so that its shooting direction becomes forward (home position).

Note

zzThe position stored as the home position on the remote camera cannot be changed.

1.Press the MENU button..

2.Open CAMERA SETUP menu [24]..

3.Turn the F1 dial to display the “4.  HOME POSITION” item..

4.HOME POSITION SET

4.Press the F2 dial..

The remote camera moves to its home position.

Controlling the peripheral devices connected to a remote camera

The peripheral devices connected to a remote camera can be controlled. Control the devices with FUNCTION menu [23].

1.Press the MENU button..

2.Open FUNCTION menu [23]..

When the selected remote camera is equipped with a defroster function (AW-PH650 + camera), the defroster can be controlled.

3..Turn the F1 dial to display the “2.  DEFROSTER” item..

4..Turn the F2 dial to select “Off” or “On”, and then press the F2 dial to confirm the selection..

2.DEFROSTER

When the selected remote camera is equipped with a wiper function (AW-PH650 + camera), the wiper can be controlled.

3..Turn the F1 dial to display the “3.  WIPER” item..

4..Turn the F2 dial to select “Off” or “On”, and then press the F2 dial to confirm the selection..

3.WIPER

When the selected remote camera is equipped with a heater or fan function (AW-PH650 + camera), the heater or fan can be controlled.

3..Turn the F1 dial to display the “4.  HEATER/FAN” item..

4..Turn the F2 dial to select “Off” or “On”, and then press the F2 dial to confirm the selection..

4.HEA TER/FAN