Setting an ND filter, ND Filter, ND1 | Panasonic AWRP120GJ instruction

Making image adjustments for the selected remote camera (continued)

Setting an ND filter

The ND filter setting can be configured when the selected remote camera uses a lens with an ND filter function.

1. Press the MENU button to turn on its indicator..

2. Open ND FILTER menu [22]..

1.ND FILTER

ND1

3.Turn the F2 dial to select a setting, and then press the F2 dial to confirm the selection..

The settings displayed when you turn the F2 dial differ depending on the model of remote camera connected.

The following shows the menu display on the unit and the setting values of the remote cameras.

		Remote camera setting values
	Menu display		AK‑HC1500	AW-HE50
	Menu display			AW-HE60
	on the unit	AW‑HE120		AW-HE60
	on the unit	AW‑HE120	AK‑HC1800	AW-HE100
			AK‑HC1800	AW-HE100
				(*1)
	ND1	Through	Clear	―
	ND2	1/4	1/4	―

	ND3	1/16	1/16	―
	ND4	1/64	1/64	―

(*1) “ND2↓”, “ND3↓”, and “ND4↓” can be displayed by turning the F2 dial but a selection cannot be confirmed by pressing the dial.

Remote camera setting values

Menu display	AW‑HE870
Menu display	AW‑E860
on the unit	AW‑E750
	AW‑E650
	AW‑E350
Off	Off

On	On

Selecting an ND filter with the USER buttons (USER 1 to USER 8)

The ND filter settings “ND1” to “ND4” can be assigned to the USER buttons (USER 1 to USER 8) to enable selection with the buttons. ⇒“Assigning functions to the USER buttons” (page 30)

1.Press one of the USER buttons (USER 1 to USER 8)..

The indicator of the selected button turns on and the corresponding ND filter is applied.

zzWhen AW‑HE870, AW‑E860, AW‑E750, AW‑E650, or AW‑E350 is connected:

The ND filter of the remote camera can be turned Off and On with the USER button on the unit that has ND1 assigned.

11

Image 11

Panasonic AWRP120GJ Setting an ND filter, ND Filter, ND1, Selecting an ND filter with the User buttons User 1 to User

Contents

Operating Instructions Illustrations and screen images in this manual About trademarks and registered trademarksCopyrights Abbreviations Contents How to turn on the power of the remote cameras How to turn on and off the power of the remote cameras „„Turning off the power of all the cameras How to turn off the power of the remote camerasTurning off the power one camera at a time Turning off the power of multiple cameras Bars button Making image adjustments for the selected remote cameraColor adjustment section ZzR and B pedestal Automatically adjusting the white balance Setting the gainSetting the pedestal Setting the white balance Automatically adjusting the black balance Setting the black balanceManually adjusting the white balance R and B gain settings Auto tracking white adjustment ATW Setting the shutter speed Setting the detailAdjusting the shutter speed Setting the shutter mode AW‑HE50 Setting the shooting mode Scene 1 to Scene Selecting an ND filter with the User buttons User 1 to User Setting an ND filterND Filter ND1 Operate the OSD menu Hold down the Camera OSD button to turn on its indicatorHold down the Camera OSD button to turn off its indicator Operating the osd menu of a remote camera Pmem Operating preset memory PmemZzLighting of number button indicators ZzChanging pages Deleting preset memory Delete Registering preset memory StoreRecalling preset memory Recall Iris Scope Mode aScope settings and recalled items Recalled item Setting Speed PM GRP1 Mode Separate Operating preset memory groups Pmem GroupSetting the operation mode SEPARATE/ ALL Creating preset memory groups Pressing a button to recall a preset memory group Recalling preset memory groupsRegistering the preset memory to recall when in ALL mode PM GRP1 Mode ALL 3m50s Remained Operating tracing memory TmemRegistering tracing memory Store CAM1 Tmem Press Stop button Recalling tracing memory RecallStandby Recall Recalling Restoring Restoring tracing memory RestoreStandby Restore Deleting tracing memory Delete Recalled item Setting Setting the items to recall when recalling tracing memory T Curv Configuring the remote camera operation settingsSetting the PAN/TILT lever inclination and speed „„Operation of Speed dial Setting the zooming direction Setting the pan, tilt, zoom, and focus operation directionsSetting the panning direction Setting the tilting direction Speed with Z Off Setting the minimum lens zoom start speedSetting the focusing direction MIN Speed „„When other remote camera Setting procedure„„When AW-HE50, AW-HE60, or AW-HE120 Controlling a heater or fan Returning a remote cameras to its home positionControlling a defroster Controlling a wiper Button indicator on or blinking Configuring the unit operation settingsEnabling or disabling operation with the Enable buttons Press the Enable button Enabling Menu operation Enabling or disabling menu operationDisabling Menu operation LCD Backligh T Off Switching the focus operation and iris operationSetting the LCD panel backlight FOCUS/IRIS Standard USER1 Assigning functions to the User buttons INPUT1 Setting linking with a switcher„„Settings for the connection between unit and switcher „„Settings on the switcher BUS AUX Buscont functionEnabling or disabling the Buscont function Buscont Enabling or disabling the Camera Select function Setting the Focus Assist functionFocus Assist function Camera Select view function T/Z Control CAM Tally IP functionEnabling or disabling the Tally IP function Tallyip CAM INF Caminfformat CAM INF AlarmCAM INF function Enabling or disabling the CAM INF function Load Memory card operationsZzMemory cards Save Saving data to a memory card Save Initializing a memory card Init Deleting the files saved to a memory card Delete Loading data from a memory card Load Tally OUT Tally settings„„Settings on remote cameras Tally IN1 Power No Alarm Checking alarm informationDisplaying alarm information ALL Setup Returning the unit to the factory default state InitializeSetting items stored on the unit Setup Initialize ALL Returning the unit to the factory default stateSetting items stored on the unit AW‑RP120 CAM OUT1 Registering camera numbers to CAM OUT1 to CAM OUT10 Installing the software Setup Software Enter the IP addresses in the IP address boxes Registering the unit in Setup Software Settings for connecting with the remote cameras and switcher Displaying the Setting tab Initializing the IP addresses Executing auto IP settingAcquiring the connection settings Changing the connection destination IP addresses Clicking Refresh clears the user name and password Setting user authenticationEnter the same password as above in the Retype password box Campinp POS Campinp ModeOperations of AW-HE2 Campinp CTL Dial/button Setting item Remote camera Table of setting items dedicated dials and buttons Film Table of setting items menusVideo Table of setting items menus SW Setup SW CTL Operation lock When starting up and switching camera groupsPreset memory Messages Messages IP connection settingsMemory card Xx Menu Index Index プロフェッショナルAVビジネスユニット