![](/images/new-backgrounds/1316408/31640871x1.webp)
Memory card operations
The unit allows you to use a memory card to perform the following operations.
SAVE : Save the configuration data of the unit or a remote camera to a memory card.
LOAD : Load the configuration data saved to a memory card to the unit or a remote camera.
<Data Target for SAVE and LOAD>
Data | Description of | File names*1 | SAVE/ | |
type | data | LOAD | ||
| ||||
SETUP | Configuration data | RP01.s12 to | SAVE and | |
of unit*2 | RP99.s12 | LOAD | ||
| ||||
MEM | Preset data and | RP01.m12 to | SAVE and | |
tracing data*3 | RP99.m12 | LOAD | ||
| ||||
CAM | Configuration data | RP01.c12 to | SAVE and | |
of remote camera*4 | RP99.c12 | LOAD | ||
| ||||
UPGRADE | Unit version update | V*****.s12 to | LOAD only | |
file | V*****.s12 | |||
|
| |||
LOG | Unit operation log | RP01.log to | SAVE only | |
RP99.log | ||||
|
|
|
*1 : When SAVE is executed on the unit, the file names above are assigned automatically.
Also, after SAVE is executed on the unit, the file names can be changed with a personal computer.
·About file names SETUP: ********.s12 MEM: ********.m12 CAM: ********.c12
Use up to eight
part above. A file name other than the above may not be displayed properly on the unit.
*2 : The IP address, subnet mask, and default gateway settings of the unit are not target for the SAVE and LOAD operations.
*3 : Only the data for the selected remote camera.
The PRESET SPEED value set for each preset is loaded and saved.
*4 : Only the data for the selected remote camera.
Note
zzSAVE and LOAD are not possible with the MEM and CAM items of a camera connected via a serial connection.
Precautions on handling memory cards
zzNever remove a memory card while the memory card access lamp is lit or blinking.
If you remove a memory card while the memory card access lamp is lit or blinking, the data saved to the memory card may be lost.
zzThe data stored in a memory card may be lost due to, for example, the loss or incorrect operation of the memory card.
We recommend saving any important data to a computer or other device.
zzMemory cards
Memory cards used with the unit should conform to SD or SDHC standards.
Be sure to use the unit to format memory cards.
Memory cards with the following capacity can be used with the unit.
SDXC memory cards and MultiMediaCards (MMC) are not supported.
SD | 8 MB to 2 GB |
SDHC | 4 GB to 32 GB |
|
|
For the latest information not described in the Operating Instructions, refer to the following websites.
(Japanese) http://panasonic.biz/sav/ (English)
zzObserve the following points when using and storing the memory cards.
•Avoid high temperature and humidity.
•Avoid water droplets.
•Avoid static electricity.
36