AMX NI-3101-SIG ONname,channel, ONDPS,channel, Codes section on page 131 for more information

	Programming
Configuration Port Commands (Cont.)
Command	Description
ON <D:P:S, NAME, CHAN>	Turns on a channel on a device. The device can be on any system the
	Master you are connected to can reach. You can specify the device
	number, port, and system; or the name of the device that is defined in the
	DEFINE_DEVICE section of the program.
	Syntax:
	ON[name,channel]
	or
	ON[D:P:S,channel]
	Example:
	>ON[5001:7:4]
	Sending On[5001:7:4]
PASS <D:P:S or NAME>	Sets up a pass through mode to a device. In pass through mode, any
	string received by the device is displayed on the screen, and anything
	typed is sent as a string to the device. The device can be on any system
	the Master you are connected to can reach. You can specify the device
	number, port, and system, or the name of the device that is defined in the
	DEFINE_DEVICE section of the program.
	Example:
	>pass[5001:7:4]
	Entering pass mode.
	To exit pass mode, type + + esc esc. Refer to the ESC Pass
	Codes section on page 131 for more information.
PING <IP ADDRESS>	Tests LAN connectivity to and confirms the presence of another LAN
	device. The syntax is just like the PING application in Windows or Linux.
	Example:
	>ping 192.168.29.209
	192.168.29.209 is alive.
PROGRAM INFO	Displays the name of the NetLinx program residing on the Master.
	Example:
	>PROGRAM INFO
	-- Program Name Info
	-- Module Count = 1
	1 Name is i!-PCLinkPowerPointTest
	-- File Names = 2
	1 = C:\Program Files\AMX Applications\i!-
	PCLinkPowerPoint
	2 = C:\Program Files\Common
	Files\AMXShare\AXIs\NetLinx.axi
	2 = Name is MDLPP
	-- File Names = 2
	1 C:\AppDev\i!-PCLink-PowerPoint\i!-
	PCLinkPowerPointMod.axs
	2 C:\Program files\Common
	Files\AMXShare\AXIs\NetLinx.axi
PULSE <D:P:S, or NAME, CHAN>	Pulses a channel on a device on and off. The device can be on any
	system the Master you are connected to can reach. You can specify the
	device number, port, and system; or the name of the device that is defined
	in the DEFINE_DEVICE section of the program.
	Example:
	>PULSE[50001:8:50,1]
	Sending Pulse[50001:8:50,1]
PWD	Displays the name of the current directory.
	Example:
	pwd
	The current directory is doc:

NI-3101-SIG Signature Series NetLinx Integrated Controller 121