AMX NI-3101-SIG manual TCP/IP Settings dialog

Configuration and Firmware Update

FIG. 25 TCP/IP Settings dialog

7.Click the New button to open the New TCP/IP Setting dialog box (FIG. 26), where you may enter both a previously obtained DHCP or Static IP Address and an associated description for the connection into their respective fields.

FIG. 26 New TCP/IP Setting dialog

8.Place a checkmark within the Automatically Ping the Master Controller to ensure availability radio box to make sure the Master is initially responding online before establishing full communication.

9.Click OK to close the current New TCP/IP Settings dialog box and return to the previous TCP/IP Settings dialog box. Locate the new entry within the List of Addresses section.

10.Click the Select button to make the new entry the currently used IP Address communication parameter.

11.Click OK to return to the Communications Settings dialog and place a checkmark within the Authentication Required radio box if the Master has been previously secured with a username/password.

12.Press the User Name and Password button to open the Master Controller User Name and Password dialog box (FIG. 27). Within this dialog, enter a previously configured username and password (with sufficient rights) before attempting to connect to the Master.

FIG. 27 Master Controller User Name and Password dialog box

NI-3101-SIG Signature Series NetLinx Integrated Controller 27