AMX NI-3101-SIG manual Manage Other Devices, Master, Always be User-Defined devices

NetLinx Security within the Web Server

System Settings - Manage Other Devices - Dynamic Device Discovery Pages

Before beginning to manage any other devices, the target Master must be loaded with the program which defines the new devices and modules. In addition to this code, all IP/Serial devices must be pre-configured and connected to the system.

To access this page, click on the Manage Other Devices link (from within the System Settings section of the Navigation frame). This page (FIG. 65) (within build 323 or higher) is used as the entry point for the management of all 3rd party Dynamically Discovered Devices.

Links to additional

DDD pages

Shows loaded Duet Modules

			DDD configuration settings
			Registered configuration
			links (optional)
FIG. 65 System Settings - Manage Other Devices page
	Manage Other Devices Page
	Feature	Description
	Dynamic Device Discovery links:	These links direct the user to additional Dynamic Device
		Discovery (DDD) configuration pages which include:
		• Manage Device Bindings page is used for configuring
		application-defined Duet virtual devices by using discovered
		physical devices.
		- If your current NetLinx program (running on the target
		Master)
		has been written, and you have notified the Master of a set of
		Dynamic Devices on your system, you will then want to start
		by managing those devices through this page.
		• Create User Defined Device page provides a Web interface
		used in creating and managing the values necessary to add a
		dynamic physical device to the system. The devices added on
		this page do not support the DDD beaconing technology.
		- If after confirming the presence of your programmed
		Dynamic Devices (provided to the Master via the NetLinx
		code), and have allowed the Master to confirm the presence of
		any other Dynamic Devices, manually enter those remaining
		devices on the system via the UserDefined Device page.
		Note: IR-controlled devices (such as a VCR or Receiver) must
		always be User-Defined devices.

80 NI-3101-SIG Signature Series NetLinx Integrated Controller