STEEL UM7id OK.FH11 Mon Feb 22 13:46:32 2010 Página 10

C M Y CM MY CY CMY K
3-. Safety

Important Safeguards

1-. Read all instructions
2-. Do not touch hot surfaces. Use
handles or knobs.
3-. To protect againts fire, electric shock
and injury to persons do not
immerse cord, plugs or (state
specific part or parts in question) in
water or other liquid.
4-. This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety
5-. Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off parts
and before cleaning the appliance.
6-. Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or has been
damaged in any way. Return
appliance to the nearest authorized
service facility for examination, repair
or adjustment.
7-. The use of accesory attachments
not recommended by the appliance
manufacturer may result in fire,
electric shock or injury to persons.
8-. Domestic use. Do not use outdoors
(this item may be omitted if the
products is specifically designed for
outdoor use).
9-. Do not let cord hang over edge of
table or counter or touch hot
surfaces.
10-.Do not place on or near a hot gas
or electric burner or in a heated
oven.
11-.Always attach plug to appliance first,
then plug cord into the wall outlet.
To disconnect, turn any control to
off then remove plug from wall
outlet.
12-.Do not use appliance for other than
intended use.
13-.Save these instructions.
Before setting the appliance going, the
person installing should read this manual
carefully. The operator should be a
responsible adult. Children should be
supervised to ensure that they do not
play with the appliance. In the event of
any anomaly, contact your distributor.
Start-up
1-.Check the electrical voltage is the
same as the voltage displayed on
the machine specifications label.
2-.Fill the reservoir with fresh water. (see
picture 1) Check the water intake tube
is immersed in the reservoir.
The use of mineral water is
recommended. Water quality affects
the taste and quality of the coffee, in
addition to preventing future
breakdowns.
3-.Plug it into the mains.
In Semi-automatic models
Check that the reservoir has enough
water. If the coffee machine is used
without water, pump resistance may
be damaged.
Water control must be visual.
For use and maintenance of a i-Steel coffee machine, please, follow the attached
user manual instructions , « Steel series » in UNO/UNO PROF version , depending
on the model. For use and maintenance of the grinder I-grinder i1 / i2 follow the
attached user manual "ESPRESSO COFFEE GRINDER" (i/1-i/2).
ascasoascaso
ENGLISH
ENGLISH
16 17
ATTENTION
i·STEEL
Picture 1
1 2
13
6
2 14
15
17
23
6
18 3
TRIO
20 20
1 2 14 3
13
6
5
16
15
23
DUO
18
20
1 6
13
12
3
17
15
14
TRIO TRONIC
2A 62A
18
21
22
1
13
12
3
17
15
14
62A
DUO TRONIC
18
1 2 3
13
6
5
8
20
7
4
i·STEEL
6
(UNO)
1 2 14 3
13
6
5
16
15
23
UNO/DUO PROF
18
20 4
24