Redial list

NOTE:

1. When editing the number, you can also press and hold # to enter a two- second pause.

2.Display remains in pre- dial mode after saving the edited redial entry to directory.

Dialing a redial entry

In the Redial list, you can dial a redial entry telephone number using the HOME or CELLULAR line.

To redial an entry:

1.Press the REDIAL softkey when the handset or telephone base is in idle mode.

2.Press the UP and DOWN Navkeys to select a redial entry.

3.Press HOME/FLASH or SPEAKER on the handset, or HOME (HEADSET if available) on the telephone base.

–OR–

Press CELLULAR on the handset or on the telephone base.

Editing a redial entry

When a redial entry has been selected, you can edit the entry and save it to the directory or dial the telephone number.

To edit a redial entry

1.Press the REDIAL softkey when the handset or telephone base is in idle mode.

2.Press the UP and DOWN Navkeys to select a redial entry.

3.Press MENU/SELECT on the handset or press the SELECT softkey on the telephone base to put the selected entry to pre-dial mode (using dial pad (0-9) to add additional digits.

Press OFF/CANCEL on the handset or CANCEL on the telephone to delete the last digit.

Press the PAUSE softkey to enter a two- second pause.

4.Press the SAVE softkey to save the entry in the Directory (see pages 68 and 69).

84

Page 88
Image 88
AT&T EP5632/EP5632-2 user manual Dialing a redial entry, Editing a redial entry