AT&T EP5632/EP5632-2 user manual Remote access, Remote Command and Action

Answering system operations

NOTES:

1.If you pause for more than four seconds during remote access, a help menu listing all features and commands will be announced. If no commands are entered for approximately 20 seconds, the call will end automatically.

2.If memory is full, the system will answer after 10 rings, and announce "Memory is full, enter your remote access code." Enter your remote access code to enter the remote access mode.

Remote access

You can access your answering system remotely by dialing your home telephone number from any touch-tone telephone.

To remotely access your answering system:

1.Dial your telephone number from any touch tone telephone.

2.At anytime when the answering system answers the call, enter 5000 (default remote access code, see page 53 to change this setting).

•If you have new messages, the system will automatically announce the number of new messages and then begin to play them.

3.Enter the following remote commands on a touch tone phone.

Remote Command and Action

.....Plays all messages

.....Plays only new messages

.....Deletes the current message

(during playback)

.....Deletes all old messages

.....Repeats the current message

(during playback).

.....Press twice to hear the previous message.

.....Pause/resume message (during playback).

.....Hear a list of remote commands

.....Skips to the next message (during playback)

.....Records a new announcement

.....Turns the answering system on or off

.....To stop message playback

hang up.....Save all undeleted messages

4.Hang up to end the call and save all undeleted messages.

If desired, cut out the remote access wallet card at the back of this user's manual for quick reference.

90