System Programming Reference

System Programming changes settings for the system as a whole, or for individual lines or extensions. You can also use System Program- ming to set up dialing restrictions, define groups, and set up optional equipment. Button-Down Mode (#723) can be activated (if needed) before Line Ringing is set. Use Copy Settings (#399) to copy settings from one extension to another.

Place the Programming Overlay on the dial pad of the MLS display phone at extension jack 10 or 11

TO START SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]

PRESS [ System Program ]

PRESS [ System Program ]

TO END SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]

TO USE A SPECIFIC PROCEDURE

TO CYCLE THROUGH AVAILABLE

DIAL [ # ] and the three-digit procedure code

SETTINGS

PRESS [ Next Data ] or [ Prev Data ]

Example: [ # ] [ 1 ] [ 0 ] [ 1 ] for System Date

 

TO CYCLE THROUGH SYSTEM PROGRAMMING

TO RETURN TO DEFAULT SETTING

PROCEDURES

PRESS [ Remove ]

PRESS [ Next Procedure ] or [ Prev Procedure ]

 

NOTE: Procedures #399, #609, #722, #723, and #728- shown below in dashed boxes–are skipped when cycling.

SYSTEM DATE

Sets the month, day, and year to appear on display phones (MLS-34D and MLS-12D). Include leading zeroes for single-digit months or days (for example, January 3, 1992 is entered as 010392).

DIAL #101

DIAL the date in MMDDYY form

SYSTEM DAY

Sets the day of the week to appear on display phones (MLS-34D and MLS-12D).

DIAL #102

DIAL 1 = Sunday

2 = Monday

3 = Tuesday

4 = Wednesday

5 = Thursday

6 = Friday

7 = Saturday

SYSTEM TIME

Sets the time to appear on display phones (MLS-34D and MLS-12D). Enter four digits in 24-hour military notation, from 0000 for 12 midnight to 2359 for 11:59 p.m. (for example, 8:15 a.m. = 0815). System displays times as a.m. or p.m.

DIAL #103

DIAL the time in HHMM form (military)

PBX DIAL-OUT CODE

This procedure identifies the digit you dial to get out of the Centrex xyxtem to place an outside call.

Dial #106

Dial the digit for the code (0–9) needed to call out

= 9

SYSTEM

RECALL TIMER DURATION The Recall feature sends a timed signal (switchhook flash) to the Centrex system to which your premises equipment is connected. This setting changes the length of the signal in 25- millisecond (msec) increments. (For example, 01 = 25 msec, 80 = 2000 msec.)

Factory setting is correct for most equipment. Change the factory setting only if:

Using Recall drops calls (shorten the time).

Using Recall has no effect— i.e., no dial tone (lengthen the time).

DIAL #107

DIAL two digits to set the length of a switchhook flash (01 to 80)

= 18 (450 msec)

ROTARY DIALING TIMEOUT Change the factory setting only if you have trouble calling out on rotary lines with standard touch-tone phones. (For example, if users dial slowly and calls are not completed or are connected to wrong numbers, lengthen the timeout.) Use only

if the Dial Mode (#201) for at least one line is set to "rotary."

DIAL #108

DIAL 1 = 4 seconds 2 = 8 seconds 3 = 12 seconds

RESET LINE ASSIGNMENTS

Resets line assignments to what they were when the premises equipment was first started up: all lines are assigned to the phone connected to extension jack 10, so that a receptionist can view line activity and cover lines; and every other extension connected to the equipment controller is assigned a single primary line. To assign additional lines to an extension or to remove a line assigned to an extension, use Line Assignment (#301).

DIAL #722

BUTTON-DOWN MODE

Sets extension jacks 11-33 so that only the extension’s primary line (under the bottom leftmost programmable button on an MLS- or MLC-model phone) rings; any other lines assigned to this extension will not ring unless you use Line Ringing to change them. At extension jack 10, the extension’s primary line rings immediately and all other lines ring after a short delay.

DIAL

#723

DIAL

1

= Not active

 

2

= Active

NOTE: This option overrides any current Line Ringing settings that were specified using Centralized Telephone Programming, After activating this mode, use Centralized Telephone Programming from extension jack

10 or 11 to adjust Line Ringing on specific extensions.

SYSTEM RESET – PROGRAMMING SAVED

IMPORTANT: Using this procedure disconnects any active calls but retains equipment controller settings. Use it only if the equipment controller fails to function correctly after a power failure or down period.

= Factory Setting

= Troubleshooting procedure (see Appendix C)

DIAL #728

5-10Programming Reference

Page 87
Image 87
AT&T II manual System Programming Reference, 10Programming Reference

II specifications

AT&T II, a pivotal case in the landscape of telecommunications regulation, emerged from the expansive antitrust actions against the American Telephone and Telegraph Company (AT&T). Following World War II, AT&T had established itself as a telecommunications behemoth, monopolizing the market. The ramifications of this dominance spurred a significant shift in regulatory measures, leading to the dissolution of the Bell System in 1984, which consisted of AT&T and its regional operating companies.

One key feature of AT&T II is its emphasis on promoting competition in the telecommunications sector. The court's decision aimed to dismantle the monopolistic practices that had stifled innovation and restricted consumer choice. By encouraging competition among various service providers, the ruling paved the way for an environment where new technologies could flourish.

The technologies that emerged post-AT&T II significantly transformed the telecommunications landscape. The introduction of new digital switching systems allowed for improved call quality and increased network efficiency. The evolution of fiber-optic technology also played a crucial role, enabling faster transmission speeds and greater data capacity. Moreover, innovative services, such as mobile telephony and broadband internet, proliferated as competition increased.

Another characteristic of AT&T II is its focus on accessibility and consumer protection. The ruling mandated that telecommunications services be available to a broader swath of the population, ensuring that underserved communities had access to essential communication services. This shift not only democratized access but also laid the groundwork for the modern internet revolution, fostering the growth of the digital economy.

The impact of AT&T II can also be seen in the regulatory frameworks that followed. The Federal Communications Commission (FCC) adopted policies aimed at enhancing market transparency and ensuring fair practices among competitors. These regulatory changes helped to create a more equitable playing field, allowing smaller companies to compete against established giants.

In summary, AT&T II marked a turning point in telecommunications history, characterized by a focus on competition, technological advancements, and consumer protection. The dissolution of AT&T's monopoly allowed for the rapid evolution of technology and services, ultimately benefiting consumers and fostering an environment ripe for innovation. This ruling not only redefined the telecommunications industry but also set a precedent for how markets are regulated in the United States.