ATI Technologies X1-256P What monitors do, You need?, Where are, Drivers?, Are you planning

Installing the Hardware and Software 11

What monitors do	Your FireGL card is configured to be combined with
you need?	digital flat-panel (DFP) displays and digital CRT
	displays.
	Note: Your DFP monitor must have a data cable with
	digital-only DVI plug (DVI-D) - but not with integrated
	analog/digital DVI plug (DVI-I). Check with your
	monitor's documentation.
	You can also connect the FireGL card to high-
	resolution MultiSync or multi-frequency monitors or
	other VGA monitors.
	Notes: (1) You need a Plug-and-Play monitor that
	supports VESA's Display Channel specifications
	(DDC1 or DDC2) to take advantage of the
	DDC1/DDC2b+ features
	(2) You can use the full power of the graphics card
	only if your monitor supports the horizontal (kHz) and
	vertical (Hz) refresh rates as required by the
	graphics card. Refer to your monitor's
	documentation for recommended refresh rates
Where are the	• Windows 2000 and Windows XP drivers are
drivers?	provided on the ATI INSTALLATION CD-ROM.
	• Linux drivers and installation instructions are
	available for downloading from
	www.ati.com/support.
Are you planning	• You may connect two monitors to the FireGL™
a multi-monitor	card.
system?	• If DDC support is available, the respective
	resolution and refresh rate for each monitor is
	automatically detected.
	• The following multi-monitor and Desktop
	Management utilities are provided:
	- HYDRAVISION™
	- DualScreen