ATI Technologies Z1-128p, X1-256P specifications Monitor Tuning - available only for VGA monitors

34 Using Your FireGL Card

2Monitor Tuning - available only for VGA monitors

•With the buttons in the Move and Size sections you can tune the position and size of the monitor's display for the indicated resolution and refresh rate

i

1First use the hardware setting controls on your monitor, if available, to adjust your display size or position. Then, if needed, use the software controls in 'Adjustment - Monitor Tuning.' Check the documentation of your monitor for information on your monitor's hardware controls

2Resizing the display slightly changes the actual refresh rate. If you operate a fixed-frequency monitor check the documentation of your monitor for information on refresh rate tolerances.

•Sync Polarity: If you do not get a satisfactory display with the default sync polarity setting for the current resolution, you may try and change the settings.

•Undo: Click this button to undo the last change you made (when you clicked Apply). If you have made a modification that causes your screen to go blank or to be unreadable, the keyboard shortcut for 'Undo' is Alt-U.

•Default: Click this button to set the Monitor Tuning to the manufacturer's default settings.

i

1Press the ESC key on your keyboard to undo the changes if your monitor has lost synchronization. You may also use the keyboard shortcut for 'Undo'- Alt-U.

2If you change the resolution (in Settings) and/or the refresh rate (in Monitor), you may need to re-adjust the monitor's display.