Turning handset’s ringer on and off:

Users can use this shortcut to turn on and off the handset ringer.

1.Press and hold the RINGER OFF key.

Note: appears to indicate the ringer is turned off. The handset will not emit any sound for any incoming call.

View message waiting indicator (VMWI)

If you have subscribed to the voicemail service from the local phone company and / or Skype, turns on when you have a new message in either of the voicemail-mailboxes. After the messages have been listened to, will turn off.

Finding a handset:

Locate the handset by using this feature:

Note: All handsets registered to the base unit will produce the paging tone for 30 seconds and their screens display PAGING. If an external call comes in, all the handsets will stop paging and start playing the external ring tone.

Stop the paging:

Users can stop the paging by pressing any key on each handset or pressing the PAGING key on the base again.

Not ringing :

A handset will not emit the pagin g tone if it is powered off or in a mode other than sta ndby mode. However, the rest of the handsets will alert the paging tone when PAGING has been

pressed.

Using CID first suppression

If the user has subscribed for a Caller ID service through his or her local phone company, his or her phone will suppress the first ring before the CID. After resetting, first ring suppression will be deactivated. The phone will automatically detect if CID service is subscribed after the first call. If CID service is detected, the phone will start suppressing the first ring after the first call.

Note: Once first ring suppression is activated, the first ring before CID will be suppressed even after the user has unsubscribed to the CID service. If the user has unsubscribed to the CID service and does not wish to have the first ring suppressed, please power recycle the base.

36

Page 36
Image 36
AUVI Technologies PHIP65 manual Turning handset’s ringer on and off, View message waiting indicator Vmwi, Finding a handset