Avaya 38DHB0002UKDD manual IP Routing, Route Type, System-Hidden

Appendix B: Concepts Configuring data routing on the IPNC - Page 121

IP Routing

A routing entry must exist to support an inbound / outbound connection. The following are the routing entry types that are found on the IPNC. System-Hidden routes are present in the system but are not visible in the configuration.

Route Type		System-Hidden	Description
Dynamic		Yes	A route is dynamically added to support an
			incoming connection if the IP address is
			allocated from one of the DHCP pool.
Service-Default-Route		Yes	A “default route” check box” on the Service
			form allows the Service to be selected as the
		A service with this	default gateway. In this way the default route
			may be dynamically assigned using the
		option selected is
			Fallback service configuration; deactivated
		denoted (at the top
			service will relinquish the default route to an
		level of the service
			active service.
		configuration) by a
		green arrow (Æ)
Static		No	Routes can be manually added using the IP
			route form.
System-Hard-Coded	Yes		Added by the system on initialisation and
			cannot be deleted.
			Apart from the RemoteManager route these
			routes if modified will be recreated on reboot.
			See Table below
LAN1/LAN2 Interface		Yes	A Route entry is automatically added in
			support of the IP address and subnet
			configured LAN1 and LAN interfaces.
			These routes are not shown in the
			configuration file
			The defaults, which are associate with the
			default LAN1/LAN2 system IP address.
			192.168.42.0(LAN1)
			192.168.43.0 (LAN2)

INDeX IPNC Cassette Administration Manual	Appendix B: Concepts - Page 121
38DHB0002UKDD – Issue 7 (22/11/02)	Configuring data routing on the IPNC