Avaya 38DHB0002UKDD manual WAN with Lease Lines, Quick WAN set-up

Page 78 - Part 1 IP Connectivity How Do I?

WAN with Lease Lines

These configuration examples provide for IP connectivity between two sites using X21, V34 lease line point-to-point circuits. Two examples are given:-

•Quick WAN Set-up (No Authentication)

•Advance WAN set-up (CHAP Authentication)

The Quick and Advance WAN examples provide the same level of IP connectivity that may be modified to interoperate with 3rd party routers (see page 88). Both examples are suitable for VoIP (see page 89 for more information on VoIP configuration).

Quick WAN set-up

The quick set-up avoids the use of separate incoming/outgoing account names and password. Use a common Service Name, Service Account Name and passwords on both Unit 1 and Unit 2.

Unit 1		Unit 2
INDeX	WAN Link	INDeX
and IPNC		and IPNC

192.168.200.1/24

192.168.50.1/24

Network PCs	Network PCs
Task	Description
Step 1
Attach the WAN cable to Unit1 and Unit2 and	It is important that, when a new WAN device is
reboot.	created in the configuration, the IPNC is re-booted
	with the WAN cable attached.
	Note: Do not attempt to manually create a WAN
	device.
Step 2
Obtain configuration files	Obtain configuration file only after the IPNC has been
	rebooted with WAN cable attached (see The File
	Menu on page 25).
Step 3	See The System Configuration on page 35.
Configure the System/LAN1 with the IP
address of Unit1 and Unit2 as follows:
Unit 1
System/LAN1
• IP Address = 192.168.200.1
• IP Mask = 255.255.255.0
Unit 2
System/LAN1
• IP Address = 192.168.50.1
• IP Mask = 255.255.255.0

Page 78 - How Do I?	INDeX IPNC Cassette Administration Manual
Part 1 IP Connectivity	38DHB0002UKDD – Issue 7 (22/11/02)