Avaya 38DHB0002UKDD manual Configuration Files

The Manager Application Configuration Files - Page 23

Configuration Files

The operational configuration files (with the extension .cfg) for the IPNC are stored:

-On the Admin PC in the Manager folder

-In the IPNC's Non-Volatile flash memory

-As the active file in the IPNC's Operational memory.

For management of the .cfg files, the IPNC can be viewed as having two memory areas as follows:

Admin

PC

Manager

Folder

.cfg Files

Update

IPNC Memory

Flash	Operational
(NV)	(active)

Reboot

The IPNC Operational memory contains the active .cfg file. This active file can be updated by the IPNC itself (with changes made by users, softphones, etc.). The IPNC updates it's flash memory in two ways:

1.At midnight, provided that the IPNC is idle.

2.When an Immediate or When Free reboot is requested on a Save or SendConfig instruction from the Manager (see pages 25 and 27).

Most functions, within the .cfg files, that are sent from the PC to the IPNC's flash memory only become active when the IPNC is re-booted. However, when the Merge option is used, some become immediately operational. These are shown in the following table:

Configuration Tree Functions	Mergeable
System	No
Line	No
Unit	No
User	Partial
Shortcodes	Yes
Service	Yes
RAS	No
WAN Port	No
Time Profile	No
Firewall	No
IP Route	Yes
Least Cost Route	Yes

INDeX IPNC Cassette Administration Manual	The Manager Application - Page 23
38DHB0002UKDD – Issue 7 (22/11/02)	Configuration Files